| X-ray source | Single/double beam x-ray generator with max. 60kV (50W) / 80kV (480W), alternating voltage + current |
| Radiation leakage | 1 µSv/h / 3 µSv/h or less at 10 cm from cabinet surfaces using all safety devices |
| Safety | Special product tunnel, magnetic safety switches at doors and tunnel hatches, emergency stop button, emergency stop input/output interfaces with production line safety circuits, x-ray kill switch |
| X-ray image | From the side. One beam |
| Cooling | Very efficient, quiet DC fans/optional air conditioning |
| Body | Stainless steel, class AISI 304 / DIN EN 1.4301 (X5CrNi18-10) |
| security class | IP54 (according to IEC 60529), including touch panel and fans; optionally in the tunnel - IP66 |
| Conveyor type | Metal or plastic segmental |
| Band width | 114 mm |
| Scan height | Max 250 mm |
| Scan width | Max 150 mm |
| Conveyor speed | Depending on the product, up to 0.5 m/s |
| Maximum dimensions of the product | width x height: 150×250 mm |
| Maximum product weight | 25 kg |
| Drop method available | High-speed pusher for jars |
| Product memory | 255 different product setups |
| Screen | 17-inch color TFT touch screen |
| Inspection functions | Auto-calibration, auto-adjust for density unevenness, density, sharp contrast, soft contrast, masking technology, Super Contrast, Size Filter, Auto Edge masking, auto save/load of images, multi-segment inspection, inspection in metal cans and metallized packages, fill amount, generator power by product, password protection |
| Inputs / outputs | Programmable outputs (detection, ready, emergency shutdown), Programmable inputs (emergency shutdown, excitation, selectable control signals) |
| Data Transfer and Reporting | Ethernet for remote support over the Internet, USB for external keyboard/mouse/memory card |
| Weight | 0.85 vol |
| feed | 230 VAC +/- 10%, 50/60 Hz, max. 1.5 kW / 2.5 kW |
| Compressed air demand | Without pusher 0 MPa (0 bar/0 psi), with optional pusher system 0.4 MPa (4 bar/58 psi) |
| Environmental conditions | from 0°C to +35°C, with a relative humidity of no more than 90%, non-condensing. Optional: additional external cooling units to extend the temperature range |
| Compliance | CE, complies with EU X-ray regulations |
| X-ray detector | low noise 510mm linear scan CCD, resolution 0.8mm or 0.4mm (optional) |
X-ray SHARK XS25
The X-ray inspection system XS25 GIG is specially designed for the difficult detection of glass particles in glass or plastic containers. The equipment also detects foreign objects, such as metal, stones, ceramics or plastic, which have a different density than the product.
Due to the hygienic design with IP66 protection type for the product tunnel, the XS 25 GIG products are particularly suitable for all companies and industries that have to ensure high hygiene standards.
- High-density materials such as metal, ceramic, stone, plastic and even glass particles are detected in glass containers.
- Scanning height up to 250 mm, with curved product tunnel
- Easy operation with automatic calibration and clearly arranged functions on the 17-inch touch screen
- High speed cross pusher for glass containers
- XIA software for instant analysis and accurate and reliable detection
EN 
LT 
RU 
LV