| Verification method | High frequency magnetic field, multi-channel operation, balanced receiver coils |
| Metal detection | Black, non-ferrous metals (eg aluminum or copper, etc.) and stainless steel |
| Memory | 250 memory locations, product effect compensation is done with Teach-Assistant |
| Protection level | Control unit: IP65; Sensor: IP54, optional IP66 |
| Environmental conditions | Controller: -20°C to +40°C; Optional: -40°C to +55°C; St. humidity from 20% to 90% non-condensing; Sensor: -30°C to +60°C, optional: +90°C |
| Product temperature | Standard: -30°C to +40°C; Optional: -40°C to +60°C |
| feed | Single-phase, 110-230 V AC +/- 5 %; typically consumes 20 W (max. 60 W) |
| Interfaces | RS232, LAN (optional, SHARKNET®), USB (optional) |
| Supervision | Very low maintenance, self-calibrating sensors |
| Diagnostics | Built-in diagnostic software, automatic self-test |
Metal detectors for textiles, fibers
Metal detectors METAL SHARK® FL are mostly used for inspection of non-woven materials, textiles and films.
Both detectors are extremely flat and available in widths of 1000-4000 mm. The FL compact is installed with a swivel, so it can also be adapted to sloping strips.
Due to the high sensitivity of the FL models, small magnetic and non-magnetic metal particles (such as iron, aluminum and stainless steel) are detected across the entire width.
EN 
LT 
RU 
LV