| Verification method | High frequency magnetic field, multi-channel operation, balanced receiver coils |
| Metal detection | Black, non-ferrous metals (eg aluminum or copper, etc.) and stainless steel |
| Memory | 250 memory locations, product effect compensation is done with Teach-Assistant |
| Protection level | Control unit: IP65; Sensor: IP54, optional IP66 |
| Environmental conditions | Controller: -20°C to +40°C; optional: -40°C to +55°C; San. humidity from 20% to 90% non-condensing; Sensor: -30°C to +60°C, optional: +90°C |
| Product temperature | Standard: -30°C to +55°C; Optional: -40°C to +120°C |
| feed | Single phase, 110-230 V AC +/- 5 %; typically consumes 20 W (max. 60 W) |
| Interfaces | RS232, LAN (optional, SHARKNET®), USB (optional) |
| Supervision | Very low maintenance, self-calibrating sensors |
| Diagnostics | Built-in diagnostic software, automatic self-test |
Metal detectors for non-destructive conveyors
Metal detector model METAL SHARK® TU is used together with conveyor belts or chutes, when they cannot be divided or dismantled. The sides of the METAL SHARK® TU can be removed to allow sensor plates to be easily mounted above and below the belt.
Accurately and reliably detects magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum, etc.). Consisting of a robust stainless steel body that is also easy to clean, it is suitable for many industries.
EN 
LT 
RU 
LV