Metal detectors for the hygiene industry

METAL SHARK® R offers the highest performance in magnetic and non-magnetic metal detection. Typical applications are in the medical-pharmaceutical sector, as well as in the sanitary or food industry and for all types of chemical powders.

The rejection mechanism quickly ejects even the smallest metal objects from the product flow. The rejection unit is suitable for pipe diameters from 10 to 50 mm, the rejection time is automatically determined by the control box of the metal detector.

The hygienic housing is easy to clean, all materials in contact with the product are of FDA approved quality (PTFE and stainless steel).

Detects metal contaminants in small, free-falling products
Maximum detection accuracy of magnetic and non-magnetic metallic contaminants
FDA compliance of all parts that come into contact with the product
Hygienic design for use in hygiene, pharmaceutical or food industries

Verification method	High frequency magnetic field, multi-channel operation, balanced receiver coils
Metal detection	Black, non-ferrous metals (eg aluminum, copper, etc.) and stainless steel
Memory	250 storage locations, product effect compensation is performed automatically using the Teach-Assistant
Protection level	IP 54
Environmental conditions	Controller: From -10°C to +40°C; St. humidity from 30% to 80%, non-condensing; Sensor: From -10°C to +40°C
Product temperature	From -20°C to +55°C
feed	Single phase 110-240 V AC, 50/60 Hz, typical consumption 20 W (60 W max)
Interfaces	RS232, LAN (optional, for SHARKNET HACCP and IFS documentation), USB (optional)
Supervision	Maintenance-free, self-calibrating sensors
Diagnostics	Built-in diagnostic software, automatic self-test
Feed and drop system	Available tube diameter 25, 35, 50mm (1″, 1.32″, 2″), drop available
Flow rate	Up to 600 liters per hour, depending on product density and separation time
Best metal sensitivity	Opening 10 mm 25 mm 35 mm 50 mm	Iron Ø 0.05 mm Ø 0.15 mm Ø 0.25 mm Ø 0.40 mm
	Non-ferrous metals 1.5...2.0x Fe Aluminum 1.5...10x Fe
Product management and rejection system	FDA compliant construction where all parts in contact with the product are made of stainless steel and PTFE. The rejection block is suitable for pipes with a diameter of 10-50 mm.